The PN1 Sampler has to be mounted in a free fall situation, e.g. in a drop shaft. A part of the falling down bulk good is trapped in the cup. The bottom of this cup consists of the measuring surface of the ACO moisture measuring sensor. After enough material has been trapped, the residual moisture can be determined and finally that cup will be dumped. For cleaning the sensor an air nozzle has been integrated. The defined measuring height enables precise measuring results.
PN1 - Sampling device
Measuring the moisture content of bulk solids at difficult transfer points
Flexible
PN1 can be mounted at nearly every transport systems where a free fall of material takes place
Anytime
Integration can easily be done subsequently
Clean
Integrated air nozzle for automatical dedusting
Properties:
- Defined dumping height for ideal on-line moisture measurement
- The ACO sensor is integrated in the "cup" of PN1
- Long-lasting, pneumatic rotary drive
- Automatic cleaning of the sensor surface
- Optional: turnkey control cabinet for triggering sampler
Versions:
- PN1 is available for all sensors of the ACO sensor family
- If required, the sampler can be manufactured as well integrated in e.g. a part of a drop shaft.
Please call us
+49 (0) 7746 9 13 16
Contact →By the way:
Our service is comprehensive: from consulting through to the installation and mounting of the products up to laboratory testing and training of your staff you can get everything from a single source.